Cold cathode lighting kits are one of the simplest ways to modify your case. The problem is that with so many companies putting out lighting kits today, it can become difficult to determine which kit is best for you. Today, we are going to take a look at Spire Coolers Neonbar 2.
The lighting kit came with everything you should need to install this product. You have the Cold Cathode itself which comes in a number of colours (in this case blue), an inverter which will allow you to install two different lights, assorted Velcro and a washer to install your cold cathode and last but not least a sheet of clearly written instructions.
As was said before, installation of this unit is a snap. Follow the instructions and you can’t go wrong. They even include detailed pictures in case you don’t know the terminology. I only have one problem with the design of this kit and that is the design of the on/off switch.
Specifications:
Dimensions 310×15×15mm. (w × d × h)
Diameter 9mm
Voltage 600 V
Current 5 mA
Housing 100% acrylic shell
Life Hours 15.000
Connector Special coated 12V inverter for safety
Index
Tech Spotlight
