Thermaltake Technology, the world’s leading manufacturer of high-end PC cooling systems, is proud to announce the official ATi CrossfireX certification of its Bigwater 760i, the new generation 2U Bay liquid cooling system!

Bigwater 760i is the new generation drive bay liquid cooling system, consisted of an all inclusive drive bay unit and intelligent interconnecting water block for effortless installation. Ultra quiet pump, 12CM blue LED fan and water reservoir are all strategically positioned inside the drive bay unit to achieve maximum performance and extreme space saving at the same time!

Moreover, the slim waterblock was developed with Redundant Micro Channel Design that effectively divides water flow into micro channels to accelerate heat transfer. In the meantime, the P500 pump pushes 500L/H of water to improve the overall cooling efficiency and performance level; and the Dimple Tube Technology of the radiator increases the turbulence within the radiator to enlarge the coolant contact surface and extend the time coolant stay in the radiator to perform maximum cooling action. Despite the space saving and cooling performance, the intelligent interconnector of Bigwater 760i was designed with built-in automatic shut-off valves to prevent accidental water leakage during assembly and dismounting process.

The introduction of this new drive bay liquid cooling system from Thermaltake has not only solved many liquid cooling players’ nightmare, but also has it truly taken liquid cooling technology to a brand new era. With ATi CrossfireX Certification, Thermaltake Bigwater 760i drive bay liquid cooling will be satisfying more extreme players worldwide!

Website: Thermaltake

Thermaltake Technology today announced its newest line of power supply unit, TR2 900W and 1000W. These two models have the highest output wattage to date in Thermaltake’s most valuable and economical choice line - TR2 series. TR2 900W / 1000W is specially designed for high wattage and cost efficiency while providing built-in two 6pin and two 8pin PCI-E connectors for next generation multi-GPU graphic cards.

Due to the rapid innovation in the graphics technology, power consumption of high-performance graphics cards is growing at an incredible pace. Today manufacturers are selling power supply units at 1000 or even higher watts. However, more power usually means higher price. To provide enthusiasts with a valuable choice for high wattage PSU, Thermaltake is pleased to present TR2 900W / 1000W as the excellent balance between cost and performance.

TR2 900W / 1000W has a MTBF of over 100,000 hours and provides straight cable to deliver stable and continuous full-rated power. The use of Active Power Factor Correction ensures system builders a power factor of over 0.99 and reduces electrical waste for effective energy consumption. The PSU is equipped with four +12V rails to provide superior performance for PC system (combined loading of 75A).

TR2 900W / 1000W will be available in Q2 2008. Moreover, in order to keep your systems running safely and smoothly, TR2 900W / 1000W were designed with over current, over voltage, and short-circuit protection to prevent damages to the systems. In addition, the PSU also has all the major safety / EMI approvals including UL, CUL, CSA, VDE, NENKO, CE, CB, FCC, and BSMI certification. Thermaltake is committed to provide users with the most valuable choices of high wattage PSUs that are the excellent balance between cost and performance.

Website: Thermaltake

Internal DIY Liquid cooling system has always been the top choice of the worldwide gamers. To fulfill the heavy demands of these heavy players, Thermaltake is launching a brand new series of DIY liquid cooling system- ProWater series. And the first model to be introduced is the new “PW850i” that incorporated the latest production mechanism and technology of the internal liquid cooling world.

The P500 Pump used in PW850i has high water volume of 500L per hour to support the heavy operations of liquid cooling systems; the hard-wearing ceramic bearing further increases the life span of the pump, you will not need to worry about any pump power problems even with extended VGA or memory liquid cooling components in the future. The professional designed inlet and outlet will eliminates possibilities of air blockage. PW850i also adopts the automotive style radiator with the Thermaltake exclusive dimple dimpled tubes, DDT technology rather than the traditional ones and the adjustable fan (1300~2400 RPM); CPU heats will be transmitted efficiently in the coordinated system environment.

All copper Waterblock does not only have perfect heat conductivity, it is also very suitable for high temperature welding. The coolant channels between the cooling fins in the copper base take away the heat efficiently and effectively. The reliable brazing copper process adopted at Thermaltake ensures a leak-free internal liquid cooling system even after long hours of operation.

Other than the superb components, PW850i also incorporated many user-friendly designs; the additional Flow meter provides a clear and stylish system operation index. And the transparent UV 3/8 inch tubes with iStripe maintain smooth water flow even with sharp bending radii and 500L of water volume per hour. Moreover, in order to avoid possible low coolant level dangers, level marks have been added on the new huge transparent tank in PW850i, making coolant maintenance and monitoring easier than ever before. With easy coolant adding design, PW850i has been carefully produced to provide a safe, leak-free and easy building but still stylish liquid cooling system of your own.

Thermaltake all new PW850i Internal DIY Liquid Cooling System will satisfy all cooling demands in any system environments; It will definitely be your best choice for a quiet and efficient liquid cooling system!

Website:Thermaltake